- RF frequency range : 566 - 608 MHz
- Transmission/receiving frequencies: 1,680
- Presets: 12
- Switching bandwidth: 42 MHz
- Compander: HDX
- Frequency response: 25 - 18,000 Hz
- Signal-to-noise-ratio: > 110 dB(A)
- Total harmonic distortion (THD): < 0.9%
- Antenna connector: 2 x BNC, 50
- Audio output level (balanced): XLR: +18 dBu max Jack: +12 dBu max
- Audio output level (unbalanced): Jack: +12dBu max 12 V DC
- Dimensions (receiver): 8" x 8.3" x 1.7"
- Weight (receiver): 2 lbs
- RF output power: typ. 30 mW battery AA (Mignon)
- Power supply: 2 x AA batteries
- Operating time: typ. 8 h
- Input voltage range: 1.8V line, 3V eff. line
- Dimensions (transmitter): 3.2" x 2.5" x 0.9")
- Weight (transmitter): Approx. 5.6 oz
- Transducer / microphone type: permanent polarized 130 dB(SPL) max.
- AF sensitivity: 20 mV/Pa omni-directional
- Sound pressure level (SPL): 130 dB(SPL) max.
- Pick-up pattern (Clip-on microphone): omni-directional
CONSUMER ALERT
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.
