ETC Nomad Unlocked

General Information

Full-featured PC- and Mac-based lighting control application for use with conventional and moving lights, media servers and LED luminaires. An ETCnomad can be used with Eos sofware application, in a primary, backup, client or offline environment. To output to a lighting rig, the Eos software requires use of the ETCnomad key. When connected as a client, an ETCnomad lighting controller accesses the full output capacity of the connected system. Without the key, ETCnomad operates offline only.

Optional fader wings, programming wings, X-keys and compatibility with USB–MIDI panels allow extended and customizable control.

Feature

• 1,024 or 6,144 outputs
• ETCnomad lighting controllers can operate in a stand-alone, primary/backup and/or client environment
• When an ETCnomad lighting controller is connected as a client, output capacity is determined by the system it is connected to
• Net3/ACN/sACN and Artnet Ethernet lighting protocols
• DMX/RDM via ETC Gadget or Gadget 2
• DMX/RDM via Net3 DMX/RDM Gateways
• OSC Transmit/Receive
• UDP Transmit/Receive

See Eos and Element datasheets and operation manuals for ETCnomad lighting controller features.

Accessories

• Eos PGW (Eos Programming Wing)
• Eos MFW (Eos Motorized Fader Wing 10 and 20)
• Eos FW (Eos Standard Fader Wing 20 and 40)
• ETCpad
• aRFR/iRFR remote controls
• Alpha-numeric keyboard
• USB mouse

IMPORTANT ETCNOMAD LIGHTING CONTROLLER ORDERING INFORMATION

A single universe of output may be distributed using an ETC Gadget or Gadget 2 USB to DMX/RDM converter. Up to four gadgets are supported. Additional or all outputs may be distributed via Ethernet protocols directly (Net3/ACN/sACN, or ArtNet) or by compatible Ethernet-distribution hardware, such as Net3 DMX/RDM Gateways. The Gadget and/or network equipment must be purchased separately from the ETCnomad Lighting Control kit.

Note: The ETCnomad lighting controller does not support ETCNet2/EDMX protocols.

Note: Eos software 2.8.X or below unlocks the base dongle at 512 outputs. Eos software 2.9 or higher unlocks the base dongle to 1,024 outputs.

Note: ETCNomad is also compatible with Cobalt and Hog4.

ETCnomad lighting control software is available for download.

NOTE: The ETCnomad lighting controller does not support the ETCNet2/EDMX protocol.

MINIMUM HARDWARE REQUIREMENTS

Windows personal computer minimum requirements:

• Intel-based multi-core processor with clock frequency higher than 2.0 GHz (2.5GHz for 6144)
• Windows 7 or higher with > 500 MB free disk space
• Screen resolution of at least 1280 x 1024
• 512 MB of RAM minimum (1 GB 2,048, 2 GB for 3,072, 4 GB 6,144)
• 64 MB video card
• RJ-45 Ethernet network adapter (required to communicate with a lighting network, DMX output devices)
• USB ports for connection of Nomad dongle, accessories

Macintosh computer minimum requirements:

• Intel-based multi-core processor with clock frequency higher than 2.0 GHz (2.5GHz for 6144)
• OS X Mojave (10.14) or later with >500 MB free disk space
• Screen resolution of at least 1280x1024
• 512 MB of RAM minimum (1 GB 2,048, 2 GB for 3,072, 4 GB 6,144)
• 64 MB Video Card
• RJ-45 Ethernet network adapter (required to communicate with a lighting network, DMX output devices)