ETC ColorSource Linear 1 - Deep Blue

• 0.5 meter length
• ETC's RGB-L chipset (Red, Green, Blue and Lime)
• Available in Original or Deep Blue array options
• Homogenized optics
• Simple user interface with seven-segment display
• PowerCon in and thru power connections
• DMX in and thru (5-pin XLR or RJ45)
• RDM or local configuration
• LED droop compensation for consistent output
• Optically calibrated
• Tour-ready, aluminum housing

• RGB-L chipset color-mixing wash luminaire with eight emmitters
• IP20-rated for indoor use
• Power- and DMX-in/thru connections for simple setup
• Seven-segment, three-button interface
• 12 onboard, customizable presets and five sequences
• Rugged, die-cast, aluminum housing
• Two secondary lens slots
• Trunnions included

Electrical

• 100VAC to 240VAC 50/60Hz universal power input
• PowerCon in and thru power connections
• Up to nine luminaires (15A max) may be linked via power thru connector
• p to 10 luminaires total per circuit when used with ETC R20 relay module or Unison® Echo Relay Panel.
• Consult breaker trip curves when used with other equipemnt
• Requires power from a non-dimmable source
• Inrush:
  • 120V: 35A (First half-cycle)
  • 240V: 49A (First half-cycle)
• ETL Listed to UL1573

LED

• 20,000-hour LED life (at 70% intensity)
• 40 Luxeon® Z LED emitters (five per optic)

Color

• Exclusive RGB-L Color array
• Also available in Deep Blue array
• Unparrallelled brightness and color range
• Droop compensation maintains color accuracy during use
• Optically calibrated to ensure consistency across fixture

Optical

• Homoginized optics for a consistent, smooth beam
• Primary field angle of 24.9° and beam angle of 14.5°
• Secondary lenses available for multiple beam-spread options. Refer to accessories charts for lenses available

Control

• DMX512 in and thru via five-pin XLR or RJ45 connectors (End-of-line termination required)
• RGB, IRGBS, Direct and single channel control (See DMX control table for additional information)
• 15-bit virtual dimming engine provides smooth, high-quality theatrical fades
• RDM support for address and setting changes
• Local control of presets (12) and sequences (5)

Thermal

• Luminiare is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free flow of air around fixture housingAmbient operating temperature of 32° to 104°F
• Active electronic thermal management using variable-speed fan