Skip to content
Items marked "Oversized Ships via Truck" DO NOT SHIP FREE & we will contact you with shipping rate.
Items marked "Oversized Ships via Truck" DO NOT SHIP FREE & we will contact you with shipping rate.
ETC Source Four LED Series 1 Tungsten LED Ellipsoidal
ETC Source Four LED Series 1 Tungsten LED Ellipsoidal

ETC Source Four LED Series 1 Tungsten LED Ellipsoidal

by ETC
To see product price, add this item to your cart. You can always remove it later.
Item #: S4LEDTS
Found it cheaper? We will Price Match
Customer Service: (800) 245-6630
Product Highlights
  • 60 Warm White LED Emitters
  • 9 Interchangeable Lens Barrels Available from 5° to 90°
  • DMX512 In and Thru
  • Multiple Control Options
  • User-Friendly Control Interface
  • Console-Free Master/Slave Mode
  • Requires Power from a Non-Dim Source
  • RDM Functionality
  • 15-Bit Virtual Dimming
  • Available in Black & White
  • Choice of Connector Type
  • LED Rated at 50,000

Source Four LED Light Engine with Shutter Barrel
(For use with fixed-field lens tubes only)

The super-efficient Source Four LED Tungsten™ luminaire creates stunning warm-spectrum white light with a 3000K color temperature. The high-light-volume, low-energy fixtures replicate the light of conventional tungsten sources while requiring less power to run. Source Four LED Tungsten fixtures can be a stand-in for or used alongside tungsten units for large quantities of rich, warm white light.

Source Four LED luminaires are the same size as a traditional Source Four, so you can use them on a regular light rig without worrying about taking up too much space. Even at their compact size, they are incredibly efficient, with a better lumens-per-watt ratio than other, larger LED spots. And with a 50,000-hour lamp, you won't spend time swapping out bulbs.

Product Features:

  • 60 Luxeon® Rebel LED emitters
  • 50,000-hour LED life
  • ETL listed to UL1573 – the standard for stage and studio lighting units
  • IP20-rated for indoor use
  • Power and DMX in/thru connections for easy setup
  • User-friendly control interface with multiple modes and fixture settings
  • Rugged die-cast, all-metal housing
  • Available in black or white (silver or custom colors available, please call)
  • C-clamp Included
  • Positive locking double-clutch fixture body
  • Slot for glass or stainless steel patterns and Soft Focus Diffuser
  • Wide accessory slot with sliding cover for motorized pattern devices or optional iris
  • Hanging yoke
  • 100VAC to 240VAC 50/60 Hz universal power input
  • Neutrik power in and thru connections
  • Requires power from a non-dim source
  • Up to nine fixtures (15A max) may be linked via power thru connector (ten fixtures total per circuit) when used with R20 Relay Module or Unison Echo Relay Panel. Consult breaker trip curves when used with other equipment
  • Inrush
    -- 120V: 11A (First half-cycle)
    -- 240V: 15A (First half-cycle)
  • Soft-focus diffuser creates washes or soft light
  • Best performance using ETC’s EDLT lens tubes
  • Can use all ETC Source Four interchangeable lens barrels: 5°, 10°, 14°, 19°, 26°, 36°, 50°, 70°, and 90° field angles, as well as 19°, 26°, 36°, and 50° EDLT lenses
  • For better performance, use the new LED 50° barrel
  • DMX512 in and thru via five-pin XLR connectors
  • Multiple control options including RGB, strobe, and console-free Master/Slave mode
  • 15-bit virtual dimming engine provides smooth, high-quality theatrical fades and minimizes color shift during dimming
  • RDM functionality for address and setting changes
  • Active electronic thermal management for droop-free operation
  • Quiet fan cooling
  • Fixture is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free flow of air around fixture housing

Documentation:

Data Sheet
Source Four LED Data Sheet
Quick Guide
Source Four LED Quick Guide
Photometrics
Source Four LED Photometric Guide
ETC
S4LEDTS
No
7460A1061